| Table of Contents |
|---|
Statistics Extended
A key feature of Statistics Extended allow is that it enables users to create reports in different result groupings. All the other functionality is the same regardless of the current report grouping and the content of this guide is applicable for reports in all types of result groupings.
|
|
| A Total-grouped Extended |
| report. Presents the result summarized as |
| one row for all targets per interval. | A Subscriber-grouped Extended report Presents the result as one row per target and interval. |
The built in help function
Touchpoint Statistics has a built in help function that gives users easy access to help resources from directly within the system. By clicking on any of the info icons spread throughout the system a popup will be displayed with information about that particular feature.
Some of the help information is also presented as inline content in the user interface.
Create
...
a report with Statistics Extended
Open Statistics Extended
Go to the Statistics Extended section in Touchpoint Statistics in Statistics through the start page or through the menu.
Select report parameters
When you enter the Statistics Extended page for the first time you will be presented with the following options.
Start by selecting
- Select which period the report should cover and which weekdays that shall be included (From-To tab). Click on the calendar icons to the right of the dates to open a calendar where the dates can be selected. If you want to select a non-sequential combination of dates this can be done
...
- on the Special tab.
- Select what
...
- time of day the report shall
...
- span in the Interval.
- Select which interval grouping the report initially shall be presented in. The interval grouping can also be changed
...
- afterwards.
- Select what time format that time values such as call
...
- duration´s should be presented in. The default is hhmmss (hours:minuts:seconds)
- Under the additional tab you have the option to change the interval block length for the time grouping
...
- . The default time block value is 30 minutes.
...
- Select the type of report
...
- that you want to create in the Report tab. See the section Report types for more information about the available reports in Statistics.
- Select the result grouping that the report should be created in. See examples of the different result grouping options
...
- at the beginning of this page.
- Click on the icon in the Report targets
...
- tab to select the targets for the report (i.e. the numbers it shall include information about).
Select report targets
Under the report target tab allows you to select which Report targets tab the numbers that the report should include can be selected. The available targets depends depend on the type of report selected in the previous step. If a User is id report was selected this tab will only contains contain targets of the type User id etc.
Select one or multiple targets by checking the check box to the left of the objects. If you want to To select all you can use at once check the check box at the top.
If there is are a large number of objects in the list the filter text box can be used to narrow down the visible objectstarget. When you start Start typing your filter criteria in the text box the result will to automatically hide all objects targets that does do not match your filter the criteria. Note that selected objects target are always visible even if the they do not match the current filter textcriteria.
Once When one or multiple or more targets gas been have been selected (checked) a Create report button will be visible to the right. Click , click on it to create the report.
The report is will now being be created. Depending on how long period, how many targets that is that are included and the number of calls in the report will contain it can take only a couple of seconds or up to a couple of few minutes to create a report. If the report takes longer then than a few seconds to create a loading page will be shown loaded that displays shows the current progress. Once the report creation process is completed by the system the report is will be automatically loaded in the user interface.
...
When a report has been created it will be loaded in the user interface and additional options tabs will become available in the menu. By default the interval groupings tab will become visible active and can be used to change the loaded reports current interval grouping. The initial interval grouping used is based on the selection made before the report was created.
The available interval groupings depends depend on the report period. Shorter periods A shorter period that for example does not span multiple months does not present the Year and month interval grouping alternative etc.
The report is presented both as charts and as a spreadsheet. Some of the reports has contain more columns than what is possible to display on the screen at once and you may therefore , therefore you need to scroll horizontally to see them all.
By hovering or clicking on the column names in the charts or in the spreadsheet spreadsheets header row a column description containing information about the content of that column will be displayed. This feature is available for all columns that are presented in the system.
When 
Additional options will be available when the report was is loaded in the user interface additional options became available in the menu. This section describes these different options.
Visible columns
Under the columns Columns tab it is possible to select what columns that the report shall containinclude. By clinking clicking on the predefined column combination links at the bottom one of the predefined column combinations them can be set and the then modified further before being applied to the report. Once the desired combination is set the changes will be reflected on the loaded report by clicking When you are satisfied with your combinations, click on the Update visible columns button to update the report.
Create a saved report - (Subscription report)
When a report has been created and customized it is possible to save it as a subscription report (template i.e. a saved report) that can be created and sent to one or several e-mail addresses by the system automaticallyautomatically at any given time.
Under On the Save report tab a name and receivers saved report can be defined by defining a name, the intended receivers as well as the desired reoccurring schedule for when the report should be sent and what period it should contain once what it shall contain when it is sent. Its It's also possible to create an inactive report that is not sent automatically but that can be created manually later on from an archive with the current report settings.
The schedule scheduled times at which the saved report shall be sent can be set to a wide range of combinations for example The first day of every month 08:00 with with the Previous month.
Its It's also possible to select what result and interval grouping that groupings the report shall should be created with.
More information about the different schedule options is available on the following pages.
- Interval options
- Schedule options
The last step is to select what format the report should be sent in, depending on the selected format (ex: Excel 2010/2013) different Excel format different sub options will be available. Some formats has have support for multiple interval groupings and charts.
The report is saved by clicking when you click on the Save button at the bottom left corner. After a report has been saved a
För att spara klickar man på Spara knappen längst ner till vänster. Man kommer då till en editeringssida för den sparade rapporten där man har möjlighet att skapa ytterligare utskicks tillfällen mm. Se sidan Hantera sparade rapporter för mer information om hur man jobbar med sparade rapporter.
Exportera en rapport till Excel
För att exportera en skapad rapport till t.ex. Excel går man till fliken Exportera. Man kan välja att spara rapporten som en fil direkt ifrån webbläsaren eller att låta systemet skicka rapporten som en fil direkt till en eller flera e-postadresser.
En exporterad rapport innehåller samma kolumner som var synliga i användargränssnittet. Om flera intervallgrupperingar valts innehåller exporten en flik för varje val.
...
Fliken Information om rapporten innehåller information om den laddade rapporten och dess innehåll.
Visa en samtalsspecifikation
Genom att gå till fliken Samtalsspecifikation kan man öppna samtalsspecifikationsvyn. Av prestandaskäl visas inte samtalsspecifikationen om den skapade rapporten innehåller mer än 3000 samtal (inkommande och utgående summerat). Om den övre gränsen överskrids dela upp rapporten i mindre perioder för att få tillgång till samtalsspecifikationen.
it will be loaded in the saved report editor where additional schedules can be added etc. See the page Working with saved reports for more information about how to handle saved reports.
Export a report to Excel
To export a generated to e.g. Excel, go to the Export tab. From there you can save the report as a file directly from the browser or to let the system send the file as an attachment in an e-mail message to one or multiple e-mail addresses.
An exported report contains the same content and settings that was visible and set in the user interface. If multiple interval groupings was selected the Excel export contains one sheet per grouping. (Note that not all export formats supports multiple interval groupings in a single file).
The Excel export contains the same column descriptions as the user interface and it is shown in Excel by hovering the column headers. The column descriptions is also available in a sheet named Column descriptions.
Information about the report
The tab Information about the report contains information about the loaded report and its content.
Show a call specification list
By going to the Call specification tab it's possible to view a list of all the calls that is included in the report individually. Due to performance reasons the call specification is only available if the total number of calls in the reports i less than 3000 (incoming and outgoing summarized). To view the call specification for a longer period the report needs to be split into several reports covering shorter periods.
| Style |
|---|
#header ul { display: none;}
.page-metadata { display: none;}
.plugin_pagetree { margin-top: 20px;}
#pagetreesearch { display: none;}
#likes-and-labels-container { display: none; }
#children-section {display: none;}
#comments-section {display: none;}
#footer { display: none;}
#labels-section {display:none;
|